- BlueAluminum.jpg (73.71 Kio) Consulté 7857 fois
Comme j'ai un gros poil dans la main, je ne traduis pas les caractéristiques:
1. The instrument is Aluminum
2. The prototype had a bolt on headstock, but the finished product will have a headstock that die-cut just like the body. I expect it will be made from a separate piece and then bolted to the body
3. There are a number of different colors, the one that he displayed was deep lustrous midnight blue with black hardware
4. There are updates to the Villex pick-up. The model that he had only a pair of the pickups, unlike the 4 module set that loads out on the PASV-4.
5. The initial offering will only be 10 string models
6. The fretboard of the instrument will be a 1/4 inch less wide than a Grand
7. There is increased space in between the strings adjacent to the top and bottom, allowing for less margin of error
8. The fret rails of the instrument are cast as part of the fretboard - let me repeat that - the rails and the fretboard are one.
9. Hipshot tuners were the tuners of choice
10. The scale of the instrument will revert to the 34" length
11. His prototype had 5 additional frets on the melody side in the higher register, it is expected that there will be only 2 extra frets in the final version
12. There will be room on the instrument for MIDI
13. Significant updates to truss in that it is adjustable in four places
14. The back of the neck is scooped / scalloped on the side to within a 1/4 inch of the truss (see picture) making the neck extremely thin
15. The point of the rails are not as fine, the best way to define this is to think of them at a 75 degree angle instead of a 90 degree angle.
)
)